Home > Brushless DC Motor Driver >

V8.3E Hall Free Brushless DC Motor Driver Commutator Board

Product Categories

Changzhou Junqi International Trade Co.,Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

V8.3E Hall Free Brushless DC Motor Driver Commutator Board

Name: V83E Hall Free Brushless DC Motor Driver Commutator Board
Brand: JUYI
Price: 1 USD

Quality V8.3E Hall Free Brushless DC Motor Driver Commutator Board for sale

Brand Name : JUYI

Model Number : JYQD-V8.3E

Certification : CE,

Place of Origin : China

MOQ : 1 set

Price : Negotiable

Payment Terms : T/T,L/C,Paypal

Supply Ability : 10000sets/Month

Delivery Time : 5-10 days

Packaging Details : PE bag+ carton

Product Name : Brushless Dc Motor Driver Board

Working Voltage : 12V-36VDC

Max current : 15A

Working Current : 15A

PWM Speed Control : PWM frequency:1-20KHz,Duty cycle 0-100%

Analog voltage speed regulation : 0-5v

Brushless : for sensorless brushless dc motor

Technical Support : Yes

Color : Blue

Speed pulse signal output : Yes

Contact Now

JYQD_V8.3E Hall-Free Motor Induction Motor Control Drive Board Speed Control Board Commutator Board

JYQD-V8.3E brushless DC motor driver board

Application notes:

JYQD_V8.3E driver board is bare board without housing and heatsink. If the power of the motor below 60W ,it does not need to add heatsink, It only needs to ensure normal ventilation and well insulation. If the power of the motor more than 60W, it must add heatsink like the diagram as below.

Please take note that JYQD_V8.3E driver board has no anti-reverse connection protection, it will permanently damage the driver board if reversed polarity connection.

The 5V output port on the driver board prohibits connect external device. It is only applicable to the external potentiometer and switch of the board for speed regulation and reversal.

Model number	JYQD-V8.3E
Operating temp.	-20—85℃
Operating voltage	12V-36V
Max current	15A
Cont.working current	15A
· PWM speed control	PWM frequency:1-20KHZ; Duty cycle 0-100%
Analog voltage speed regulation	0-5V
O.V / L.V protection	YES
Speed pulse signal output	YES

V8.3E Hall Free Brushless DC Motor Driver Commutator Board

Wiring Diagram:

5V -----Driver board internal output voltage

M ---- Motor speed pulse signal output port, 5V pulse signal.

1. Control port

Z/F---- Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.

VR ----Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%

GND—Used for Drive board internal control

2. Power port

MA ----motor phase A

MB ---- motor phase B

MC---- motor phase C

GND----DC-

VCC----DC +

3. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.

4.Control port distance: 2.54mm,Power port distance:3.96 mm

5. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.

Dimensional Drawing:

We can supply extra assy as connector wires and heatsink.

Product Tags: